ClearView Hawk04-HD, Руководство пользователя

Страница: 48 / 155

In Figure 4-34, input mode value in the No. blank, and click pattern button.
4.8.7 Auto Scan Setup
In Figure 4-33, click border button. The interface is shown as in Figure 4-38. Please go to
Figure 4-30, use direction arrows to select camera left limit
Then please go to Figure 4-38 and click left limit
button Repeat the above procedures to set right limit.
Figure 4-38
4.8.8 Activate Auto Scan
In Figure 4-
34, click “Auto Scan” button, the system begins auto scan. Correspondingly, the
auto scan button becomes Stop button. Click stop button to terminate scan operation.
4.9 Flip
In Figure 4-34, click page switch button, you can see an interface is shown as below. See
Figure 4-39. Here you can set auxiliary function. The aux value has relation ship with the Aux
button of the decoder.
Click page switch button again, system goes back to Figure 4-30.
Figure 4-39