ClearView Hawk04-HD Скачать руководство пользователя

Страница: 24 / 155

Figure 3-1

3.8 Other Interfaces

There are still other interfaces on the DVR, such as USB ports.

4 Overview of

Navigation

and Controls

Important

•

Slight difference may be found in the interface. All the interfaces listed below are based
on the 4-channel series product.

Before operation, please make sure:

•

You have properly installed HDD and connect all the cable connections.

•

The provided input power and the device power are matched.

•

The external power shall be DC +12V.

•

Always use the stable current, if necessary UPS is a best alternative measure.

4.1 Login, Logout & Main Menu

4.1.1 Login

After system booted up, system pops up the startup wizard. Click

the Cancel button; you can go to the system login interface.

Click the Next Step button; you can go to the startup wizard interface. Here you can set

the system basic information. See Figure 4-1.

Содержание Hawk04-HD




























































































































































Результаты поиска

Содержание Hawk04-HD

Отзывы:

Похожие инструкции для Hawk04-HD

Бренды по названию

Популярные бренды

ClearView Hawk04-HD, Руководство пользователя

Результаты поиска

Содержание Hawk04-HD

Отзывы:

Похожие инструкции для Hawk04-HD

Бренды по названию

Популярные бренды