Clearfield FieldSmart FxMP Скачать руководство пользователя страница 3

Страница: 3 / 37

FieldSmart

FxMP Panel & Standard Frame

__________________________________________________________

Installation Manual

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected]

Manual 019807 REV A - June 2018

Application

Description

Technical Specifications

FieldSmart FxMP Panel

Port Density

144

288

Dimensions

1.75” H (44.45mm)

3.5” H (88.90mm)

4” H (101.60mm)

6” H (152.40mm)

11” H (279.40mm)

Ratings

Compliant to Telcordia GR-63, GR-449, GR-20 and GR-409

Cassette Types Supported Clearview

Blue

Connector Types

SC/UPC, SC/APC, LC/UPC, LC/APC, FC/UPC, FC/APC, ST/UPC, MPO

Cable Types

Indoor Riser, Indoor Plenum, Indoor/Outdoor, Outdoor (Riser/Non-Rated), Outdoor Armored (Riser/Non-Rated), FieldShield

Splice Capacity

12 splices in each Clearview Cassette

Storage Capacity

One meter of 250 μm fiber

Front Protection

3.25” (82.6 mm) or 4.77” (121.16 mm) radius fingers

Color

Almond or black

Material

Steel and aluminum with almond powder coating

FieldSmart Standard Frame

Dimensions

Available in 7’, 8’ or 9’ heights and in either 19” or 23” widths; depth is 10” (5” frame + 5” guard box)

Ratings

Compliant to Telcordia GR-449

Cable Entry Clamp Location

On-frame (Note: Cable clamps included with panels)

Material

Steel

Standard Frame:

FieldSmart FxDS Standard Frames are available in 7’, 8’ or 9’ heights and in 19” or 23” widths. Frames are

seismic-rated and come with an unequal flange. When used with FieldSmart FxMP Panels, they provide the

highest port density in the industry - up to 1,728 ports in a 7’ frame.

FxMP Panel:

The FieldSmart FxMP Panel is a high density, low maintenance fiber distribution panel for use in a data

style rack/cabinet, a 19” (482.60mm) or a 23” (584.20mm) frame. Utilizing the Clearview

Cassette,

FieldSmart FxMP Panels are intelligently designed to provide the user with superior fiber access and

craft-friendly, radius protected fiber management for routing and deploying fiber jumpers.

Standard Frame:

Frames are used for mounting equipment in a central office, head end or data

center applications.

FxMP Panel:

Provides an interconnect or cross-connect environment for up to 288 ports of high density fiber

for inside plant and outside plant environments.

Содержание FieldSmart FxMP






































Результаты поиска

Содержание FieldSmart FxMP

Отзывы:

Бренды по названию

Популярные бренды

Clearfield FieldSmart FxMP, Руководство по установке

Результаты поиска

Содержание FieldSmart FxMP

Отзывы:

Бренды по названию

Популярные бренды