manualshive.com logo in svg

Clearfield FieldSmart FxMP, Руководство по установке

Поделиться
Скачать
Clearfield FieldSmart FxMP Скачать руководство пользователя страница 12

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected] 

12

FieldSmart

®

 FxMP Panel & Standard Frame

Installation Manual 

 _________________________________________________________

Manual 019807 REV A - June 2018

FxMP Panel Mounting

The FieldSmart FxMP Panel will arrive with reversible mounting brackets unattached. Depending on the size of the frame, 

you will attach the mounting brackets in a 19 inch or 23 inch configuration. 

The exception to this will be the 1RU panel, which has mounting brackets that are not reversible. These mounting brackets 

will attach to a 19 inch frame. Extender brackets will be supplied with the panel, which can be attached to the mounting 

brackets in order to mount the panel to a 23 inch frame.

Installing Mounting Brackets for 19 Inch Frame

If installing reversible mounting brackets for a 19 inch frame 

configuration, the large side of the bracket will be mounted to the 

panel. The smaller side will be used to mount the panel to the 

frame.

Note: 

Mounting brackets for the left and right sides of the panel 

are identical, interchangeable parts.

1.

Align the reversible mounting bracket so that the holes in the bracket and the panel body match up. Using the  

provided screws (three per bracket) secure the bracket into place. Repeat for the other side.

Note: 

There are four bracket-to-panel screw holes on each side of the bracket and panel. One of the holes will be a 

smaller size, used for a bonding screw with the NEBS panel.

2.

Содержание FieldSmart FxMP






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды