manualshive.com logo in svg

Clearfield FieldSmart FxMP, Руководство по установке

Поделиться
Скачать
Clearfield FieldSmart FxMP Скачать руководство пользователя страница 22

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected] 

22

FieldSmart

®

 FxMP Panel & Standard Frame

Installation Manual 

 _________________________________________________________

Manual 019807 REV A - June 2018

Cassette Installation

Note: 

If the cassettes you wish to install into the panel do not already have an attached mounting ear and push/pull plunger, 

proceed with step 1. If the cassettes already have the mounting ear attached, jump ahead to step 5.

The mounting ear will attach to the Clearview Blue Cassette 

by sliding into place along the t-rail on the side of the  

cassette which will be closest to the center of the panel.

1.

To attach the mounting ear onto the cassette, align the 

channel on the side of the mounting ear with the t-rail on the 

side of the cassette. Press the mounting ear firmly against 

the t-rail, allowing the lever to flex back and the t-rail to 

engage with the channel on the mounting ear.

2.

Slide the mounting ear up to the t-rail until it comes to a stop 

and the lever is fully seated into place in the first notch on 

the t-rail.

3.

Содержание FieldSmart FxMP






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды