manualshive.com logo in svg

Clearfield FieldSmart FxMP, Руководство по установке

Поделиться
Скачать
Clearfield FieldSmart FxMP Скачать руководство пользователя страница 18

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected] 

18

FieldSmart

®

 FxMP Panel & Standard Frame

Installation Manual 

 _________________________________________________________

Manual 019807 REV A - June 2018

Once you’ve mounted the panel and the cable is attached to the frame, open up your cable. Clearfield recommends a 

cable opening of 11 feet (up to 8ft of slack (depending upon panel size) and 3ft for splicing in the cassette). Proceed to 

mounting the cable to the panel.

Use the included mounting screws to fasten the cable clamps and 

cable to the rear cable bracket. The cable should be mounted so 

that the breakout is slightly beyond the end of the clamp.

Note: 

Panels shown in images may not match product received. 

Cable mounting will be performed in the same manner regardless.

Clamp the cable to the panel using the same method you used 

to mount it to the frame, choosing the closest size pair of cable 

clamps, and using grommet tape to make up the size difference.

If mounting the cable to the back of 

a 1RU panel, a vinyl coated P-clip  

(supplied as a ship-along) will need 

to be used to secure the cable. Use 

grommet tape around the cable as 

needed to increase the size of the 

cable for proper grip.

7.

8.

9.

10.

Содержание FieldSmart FxMP






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды