manualshive.com logo in svg

Clearfield FieldSmart FxMP, Руководство по установке

Поделиться
Скачать
Clearfield FieldSmart FxMP Скачать руководство пользователя страница 23

23

FieldSmart

®

 FxMP Panel & Standard Frame

__________________________________________________________

Installation Manual

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected] 

Manual 019807 REV A - June 2018

4.

If the push/pull plunger is not already installed, insert the first piece of the push/pull plunger (grommet) into the hole in 

the mounting ear. Follow that by installing the second piece (plunger) of the push/pull plunger into the hole of the first 

piece. Push the plunger in until it clicks into place, then pull back until the expansion of the grommet disengages.

Install the cassette into the panel by engaging the t-rail on 

the side of the cassette with the corresponding slide rail 

inside the panel. Slide straight back until the mounting ear 

on the opposite side makes contact with the panel bulkhead.

5.

Secure the cassette in place. To do this, ensure the push/

pull plunger is through the small hole in the panel bulkhead, 

and push the plunger to expand the grommet and lock the 

cassette in place.

6.

Содержание FieldSmart FxMP






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды