Clear-Com CELLCOM 10, Инструкция по эксплуатации

Страница: 135 / 168

Vitec Group Communications
CellCom-10 Instruction Manual 1 0 - 7
Listen and Dual Talk and Listen always have a latching action
regardless of the setting of this check box.
On Page Change Cut
Checking the Talk or Listen boxes will cause Talk or Listen audio paths
on the current page to be cut when a different page is selected. The
audio paths will be restored when the page is reselected.
REGISTERING BELTPACKS
• First load or retrieve a configuration as described in the "Getting
started" section.
• Connect the beltpack to the PC using the standard Beltpack serial
cable (3.5mm stereo jack to 9 way D type connector), and power
it on.
• Select the serial port connected to the beltpack by using the
drop-down box in the "Serial comms" section of the dialog box.
(Note that if there are 2 serial ports on the PC, one can be used to
be program the base stations while the other can be used to
program beltpacks).
• Select the "Slot" to register the new beltpack in (i.e. one of slots 1
to 10) using the arrow buttons next to the "Overview" button at the
top of the dialog box.
Figure 10-8: Registering a Beltpack
Note: At this stage the user can also change the label of the
beltpack by overtyping the value in the edit box shown here
(currently containing the text "Bpk01").
• Click the "Register New" button in the "Registration" section of the
dialog box.