Clear-Com CELLCOM 10, Инструкция по эксплуатации

Страница: 118 / 168

Vitec Group Communications
CellCom-10 Instruction Manual
8 - 6
Base Connection Indicator Light
This yellow light indicates that the CEL-SP splitter is receiving data
from the CellCom 10 base.
Matrix (CellCom 10 Base) Connector
This RJ-45 connector accepts a 4-pair data cable from the CellCom 10
base station transceiver port. This cable can be up to 1,000 meters
(3,200 feet) in length if 24AWG cable is used or up to 500 meters
(1,600 feet) if 26AWG cable is used.
Note: It is recommended that shielded CAT-5 cable is used.
Splitter-to-Transceiver/Antenna Signal Indica-
tor Light
These yellow lights indicate that a connection from the CellCom 10
base is available to the particular transceiver connected to that port.
Transceiver/Antenna Connectors
These five RJ-45 connectors are used to connect up to five remote
transceiver/antennas to the splitter, and via the splitter to the CellCom
10 base station. Each of these cables can be up to 1,000 meters in
length if 24 AWG cable is used or up to 500 meters long if 26 AWG
cable is used.
Note: It is recommended that shielded CAT-5 cable is used.
CEL-SP REAR PANEL
Figure 8-4: CellCom 10 Splitter Rear Connector Panel
1
2
3
4