background image

Intended use

GP - Series | Version 1.03

7

2.6 Safety labels on the water pump

The following safety labels and instructions are attached 
to the water pump (Fig. 1) and must be ob-served.. 

Fig. 1:  Safety labels

If safety labels on the machine are damaged or missing, 
this can cause errors, personal injury and material dam-
age. The safety symbols attached to the machine must 
not be removed. Damaged safety symbols must be re-
placed immediately.

As soon as the signs are not clearly visible and compre-
hensible at first glance, the machine must be stopped 
until new signs have been attached.  

3

Intended use

The water pump is used exclusively for water supply in the 
domestic area such. Irrigation of the garden, as well as for 
pressurization and general water movement in the house

-

hold.

The water pump must not be operated in potentially explo

-

sive environments and the max. permissible temperature of 
the pumped medium must not exceed 35 ° C.

Proper use also includes compliance with all information in 
this manual.

For structural and technical changes to the water pump, the 
company Stürmer Maschinen GmbH assumes no liability.

Claims of any kind due to damage due to improper use are 
excluded.

3.1 Improper use

3.2 Residual risks

Even if all safety instructions are observed, and the ma-
chine is put to its intended use, there are still residual 
risks, which are listed below:

-  Risk of injury of upper and lower limbs while equip-

ment is operating.

-  Heat build-up on components can cause burns and 

other injuries.

-  Danger of fire and explosions in connection with the 

absorption of wrong liquids.

-  Electrical hazards due to contact with parts and high 

voltage (direct contact) or with parts that are under 
high voltage due to a defect in the device (indirect con

-

tact).

ATTENTION!

Any change on the water pump is prohibited. The 
change may void the warranty, cause burns and per

-

sonal injury, even fatal for the user.    
The manufacturer will not be liable for any damage 
that the results from failure to follow these instructi-
ons or from the misuse of the equipment to objects or 
persons. 

WARNING!

Danger in case of misuse!

Misuse of the water pump can lead to dangerous sit-
uations.  
-  Only operate the water pump in the power range li

-

sted in the technical data.

-  Never bypass or override the safety devices.

-  Only operate the water pump in a technically per-

fect condition.

ATTENTION!

The pump is not suitable for pumping salt water, fae-
ces, flammable, corrosive, explosive or other dan-
gerous liquids. 
The delivery fluid must not exceed or fall short of the 
maximum or minimum temperature specified in the 
technical data. 

-  Do not soak up aggressive cleaning agents as they 

could damage the device.

-  do not absorb any materials that may damage the fil

-

ter elements (e.g., broken glass, metal, etc.).

Содержание 7521100

























Отзывы: