background image

7

SELECTING THE SITE

The machine should be placed on a concrete floor which is at least 160mm thick and capable of
withstanding the load of the machine and vehicle (2450 lbf/in

 min).

The surface should be perfectly flat and level. If this is not the case, metal shims must be used beneath
the base plate to ensure it is level. (see Final Adjustments - p10).  The floor must be capable of
receiving and securing four M12 foundation bolts (not supplied). Please refer to ‘Assembly - Base
Frame’ for further details.

If the machine is mounted on a ‘load bearing floor’, expert advice should be sought to ensure it
is of sufficient strength to withstand the load.

There should be sufficient space for a vehicle to manouvre to ensure a straight line path on to the
lift, and the height clearance, directly above the lift, should be sufficient to ensure that no damage
could occur to a vehicle being lifted.

NOTE: Ideally, a height gauge, set to the maximum vehicle height permitted, should be erected at
the entrance to the lift.

The area must be large enough to provide a Safety Zone. The diagram below illustrates the minimum
suitable space for the machine.

T

he Free Safety Area is that area where equipment, personel etc., must NOT be positioned at

any time other than when working beneath the vehicle.

The size of this area will depend upon the size of the vehicle - the larger the vehicle, the larger the
area. However, the MINIMUM FREE SAFETY AREA is 4310 x 6200mm

123456

123456

123456

123456

123456

Minimum Working Area(AxB)

5310 x 7200mm

 (17 x 23½ft)

Space occupied by the machine (AxB)

3110 x 1500mm

(10 x 5ft)

12345678901

12345678901

12345678901

12345678901

12345678901

12345678901

12345678901

Free Safety Area (AxB)

4310 x 6200mm

(14 x 20ft)

123456

123456

123456

123456

B

12345678901234567890123456

12345678901234567890123456

12345678901234567890123456

12345678901234567890123456

12345678901234567890123456

12345678901234567890123456

12345678901234567890123456

12345678901234567890123456

12345678901234567890123456

12345678901234567890123456

12345678901234567890123456

12345678901234567890123456

12345678901234567890123456

12345678901234567890123456

12345678901234567890123456

12345678901234567890123456

12345678901234567890123456

12345678901234567890123456

12345678901234567890123456

12345678901234567890123456

12345678901234567890123456

12345678901234567890123456

12345678901234567890123456

12345678901234567890123456

12345678901234567890123456

12345678901234567890123456

12345678901234567890123456

12345678901234567890123456

123456789012345678901234

123456789012345678901234

123456789012345678901234

123456789012345678901234

123456789012345678901234

123456789012345678901234

123456789012345678901234

123456789012345678901234

123456789012345678901234

123456789012345678901234

123456789012345678901234

123456789012345678901234

123456789012345678901234

123456789012345678901234

123456789012345678901234

123456789012345678901234

123456789012345678901234

123456789012345678901234

123456789012345678901234

123456789012345678901234

123456789012345678901234

123456789012345678901234

123456789012345678901234

123456789012345678901234

123456789012345678901234

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567890123456789012345678

1234567890123456789012345678

1234567890123456789012345678

1234567890123456789012345678

1234567890123456789012345678

1234567890123456789012345678

1234567890123456789012345678

1234567890123456789012345678

1234567890123456789012345678

1234567890123456789012345678

1234567890123456789012345678

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

1234567

A

Содержание Strong-Arm CPL30S























Отзывы: