Clarke American Sanders 07072A, Руководство оператора

Страница: 8 / 81

EN
ENGLISH
Clarke ®
American Sanders Operator's Manual (EN) - B2 FORM NO. 79001C - 7 -
Figure 3
Figure 4
Machine Set-Up
How to Install the Sandpaper
1. To install or replace abrasive, turn the machine
upside down and let it rest on the motor cover.
With the wrench supplied, remove the screw and
abrasive retainer. Hold pad to prevent it from
rotating and turn wrench. See figure 3
2. Center abrasive on pad and install the abrasive
retainer and screw. Tighten screw. See figure 4.
3. Return machine to upright position.
WARNING:
Serious injury could occur when at-
tempting to replace abrasive while
machine is connected to power supply.
Always disconnect power before
installing abrasive.
CAUTION:
Gearbox damage could result from
machine resting upside down for
extended periods of time. Lubricant
may drain from gearbox. Always return
machine to upright position after
installing abrasive.