4
SPECIFICATIONS
Model No .............................................................................. CFIS 250
Part No. ................................................................................. 6500690
Motor ..................................................................................... 230V~ 50Hz 1ph
Input Power Rating ...................................................... 2.0Kw
Speed ........................................................................... 3000 RPM
Input Current ................................................................ 9Amps
Fuse rating .................................................................... 13Amps
Duty Cycle ............................................................................ S6 40%**
Saw Blade ............................................................................. 250mm (10”) dia. 30mm Bore TCT
Saw Blade Maximum Speed Rating ....................................... 6000RPM
Table Size ............................................................................... 504 x 552mm
Table Saw Mode
Maximum depth of cut at 0
O
...................................... 65 mm
Maximum depth of cut at 45
O
.................................... 36mm
Mitre Saw Mode
Cross Cut at 45
O
WxH ............................................... 160 x 75mm
Cross Cut at 90
O
WxH ................................................ 210 x 75mm
Bevel Cut at 45
O
WxH ................................................ 210 x 65mm
Compound Mitre at 45
O
WxH ................................... 160 x 65mm
Dust Port Dia. (Inner/Outer)
Top Guard .................................................................... 30/38mm
Bottom .......................................................................... 28/32mm
Rear .............................................................................. 32/38mm
Sound Power Level - Guaranteed ..................................... 106dBL
wA
Net Weight ............................................................................ 53kg
** Duty Cycle: This product may be run continuously, but under load only for 4 minutes in any 10
minute period.
Restrictions of use
DO NOT use to rebate, tenon, mould, groove or for any other non-through cutting operations.
DO NOT fit any other tool or combination of blades.
This saw is NOT suitable for cutting:
•
Timber greater than 65mm in thickness in Table Saw mode, or 75mm in Mitre Saw mode.
•
Metal, Stone, Rubber, Plastic, Bones, Etc.
•
Logs or round timber.
Содержание 6500690
Страница 31: ...31 PARTS DIAGRAMS...
Страница 32: ...32...
Страница 33: ...33...
Страница 36: ...36...
