Using your BTE Sound Processor
Turning your BTE Sound Processor On/Off
You will use the PowerCel module to turn your BTE Sound
Processor on and off.
·
To turn off the BTE Sound Processor, you must remove
the PowerCel (see details on page 14).
·
To turn on the BTE Sound Processor, attach the PowerCel
(see details on page 8).
When you are not using your BTE Sound processor, you should
remove the PowerCel module; otherwise, the processor will
remain on and the PowerCel will continue to drain.
Putting on your BTE Sound Processor
1. Check that a charged PowerCel module has been correctly
mounted onto the BTE.
2. Check that the headpiece cable is properly plugged into the
cable connector on the processor.
3. Place the BTE over your ear and the headpiece on your head
over the implant.
IMPORTANT!
Use only the BTE Sound Processor that has been pro-
grammed especially for you.Using a different proces-
sor, which has been loaded with a different program,
may be ineffective in providing sound information and
may cause physical discomfort.
Using the Toggle Switch
Changing programs:
Your audiologist can store multiple programs on your BTE Sound
Processor during your fitting session. These programs may repre-
sent different sound processing strategies or variations of a single
sound processing strategy.
·
You can change from one program to the next by pressing
and holding the toggle switch in the upward direction for
more than one second.
10 BTE Sound Processor User Guide
11
Using your BTE Sound Processor