2. Select the power plug appropriate for your location.
3. Connect the power plug to the power supply.
4. Connect the cable from the power supply to the charger.
5. Insert the the power plug that you connected to the power
supply into the wall outlet. Green LED indicates proper con-
nection.
Rechargeable PowerCel Wallet
Rechargeable PowerCel wallets are provided
with each BTE. The wallets allow you to
carry multiple PowerCels safely and
conveniently on your key chain, in your
pocket, or in your purse.
PowerCel Charger and Power Supply
The PowerCel charger provided with the BTE Sound Processor is
designed to recharge four PowerCel modules simultaneously. It
takes approximately 3-5 hours to fully recharge a PowerCel.
PowerCel modules do not need to be fully depleted before
recharging.
CAUTION:
Only use the PowerCel charger for charging the
C LARIO N
BTE PowerCel modules. DO NOT use it to charge any other
PowerCels.
LED indicators
A green LED illuminates when the charger is connected to a
power source and indicates power flowing to the unit. Along the
side of the charger are 4 LED (Light-Emitting Diode) indicators,
one for each PowerCel module that indicate charge status. The
LED is yellow when the PowerCel charging cycle is in process.
The LED turns off when the PowerCel modules are fully charged.
Charging the PowerCels:
The following section describes assembling the PowerCel charger
and inserting the rechargeable PowerCels in the charger.
Assembling the Charger:
1. Place the charger on a flat surface.
20 BTE Sound Processor User Guide
21
Care and Maintenance of your BTE Sound Processor
PowerCel
Charger
Power Plugs
Power Supply
Connect Power Plug
Connect to PowerCel
Charger
Power Supply