Changing the Platinum Headpiece Color Cap:
1. Disconnect the headpiece cable from the headpiece.
2. Locate the cable connector.
3. Insert the Headpiece Color Cap Removal Tool as shown below
into the slot above the headpiece cable connector.
4. Push the tool straight back to lift the color cap as shown
below.
5. Close the headpiece by carefully aligning the Headpiece Color
Cap on the Headpiece and pressing both parts together to snap
them back into place.
Headpiece Color Cap Removal Tool
Cable connector
NOTE:
Each kit contains a 3" (7.6 cm) and a 4" (10.2 cm) cable and a
9.5" (24.1 cm) cable. The longer cable allows you to wear the
BTE Sound Processor on the opposite ear.
NOTE:
Be sure that you turn off the processor by disconnecting the
PowerCel before you remove the cable from the headpiece.
Connecting the Rechargeable PowerCel to the
Electronics Module
To attach the rechargeable PowerCel module:
1. Locate the slide tracks on the underside of the electronics
module and the top of the PowerCel module.
2. Position the PowerCel module so the contacts are positioned
toward the back of the BTE processor.
3. Guide the PowerCel module into the tracks on the electronics
module.
4. Slide the PowerCel module onto the electronics module until it
stops and the PowerCel and electronics module are aligned.
NOTE:
Do not force the PowerCel module onto the BTE electronics
module. The PowerCel is designed to be inserted in only one
direction.
Customizing the Platinum Headpiece - Color
Caps
Your Platinum Headpiece comes with six interchangeable color
caps, a Headpiece Color Cap Removal Tool to change the Color
Cap, and a Headpiece Clip. In addition, extra headpiece magnets
and felt disks to secure the magnets in place are included.
8
BTE Sound Processor User Guide
9
Assembling your BTE Sound Processor
