Claas ARES 546 Скачать руководство пользователя страница 157

Страница: 157 / 178

ARES 506-606 - 02.2005 - GB

L.13

FRONT POWER TAKE-OFF BOX OIL LEVEL:
CHECK

The oil level must be visible from the side (K).
Adjust the oil level through aperture (L) if necessary.

Important: The oil level must not be higher than the spyhole:
Risk of heating, premature wear of the different mechanical
parts.

FRONT AXLE FINAL DRIVE OIL LEVEL:
CHECK

- Position the tractor on a flat horizontal surface.
- Position the inscription "OIL LEVEL" horizontally.
- Unscrew the plug (M).
- The oil level should be just at the bottom of the aperture; Top

up if required.

- Tighten the drain plug (M): Torque setting 7 daN.m.

FRONT AXLE DIFFERENTIAL UNIT OIL
LEVEL: CHECK

- Position the tractor on a flat horizontal surface.
- Unscrew the plug (N). The oil level should be just at the

bottom of the aperture; Top up if required.

- Tighten the drain plug (N): Torque setting 7 daN.m.

1 - Rigid Front Axle.
2 - PROACTIV Front Axle.

421hsn01

511hpn01

451hsn05

452hpn01

Operation n°

Содержание ARES 546



















































































































































































Результаты поиска

Содержание ARES 546

Отзывы:

Claas ARES 546, Использование и обслуживание, Страница: 157 / 178

Результаты поиска

Содержание ARES 546

Отзывы: