manualshive.com logo in svg

Claas ARES 546, Использование и обслуживание, Страница: 149 / 178

Поделиться
Скачать
Claas ARES 546 Скачать руководство пользователя страница 149

ARES 506-606 - 02.2005 - GB

L.5

ENGINE AIR FILTER: CLEANING

This maintenance operation has to be carried out with the 
greatest care, away from any dust. The long life of the engine 
depends on this.
- Place the tractor in a dust-free place before starting work.
- Raise the bonnet nose.
- Pull bolt (D) and turn lid (E) anti-clockwise, to remove it.
- When the main filter (F) needs to be cleaned, tapping it with 

the palm of the hand removes some of the dirt.

Important: Never use a compressed air blower.

Check carefully that cover (E) is correctly fitted on the body of the 
filter, then push back bolt (D).
Check that the ventilation tubing is in good condition and that the 
clips are tightly secured.

Important: Generally speaking the main filter (F) must not be 
damaged or distorted during the cleaning operation. 
Replace it if necessary. During fitting, make sure that the 
arrows are pointing upwards.

ELIMINATION OF DUSTS (RANGE

500

 

ONLY)

Compress the valve (H).

201msn01

201msn02

201hsn03

201msn03

Operation n°

4

D

E

F

H

Содержание ARES 546



















































































































































































Отзывы:

Нет отзывов