Claas ARES 546, Использование и обслуживание, Страница: 120 / 178

ARES 506-606 - 02.2005 - GB
I.4
OPERATION
AUTOTEST START-UP
When the ignition is turned on, the INFOTRAC automatically
engages an autotest of its display unit, which lasts approximately
3 seconds. All the figures, symbols and units appear in the
display.
After engine start-up, INFOTRAC automatically engages the
function used when the engine was stopped.
PARTIAL EVENT COUNTER FUNCTION
With key (C), put index in front of symbol .
The display unit shows the number of events completed (e.g.,
round bales) since the last reset.
Resetting is accessible at all times using key (A) (press 0,5
second minimum) and does not reset the total event counter.
Counting may be stopped and manually continued at all times
using key (B) (press 0,5 second minimum).
Lit: Counter stopped.
BLINKING: Counter on.
Display: In unit, 1, 2, 3, 4, 5, 6,...
TOTAL EVENT COUNTER FUNCTION
From the previous situation, pressing for more than 2 seconds on
key C accesses the total event counter.
The display unit shows the number of events completed (e.g.,
round bales) since the last reset.
The cycle reset is accessible with key (A) (press for 0,5 second
minimum) and resets the partial and total event counter.
Counting may be stopped and manually continued at all times
using key (B) (press 0,5 second minimum).
Lit: Counter stopped.
BLINKING: Counter on.
Display: In unit, 1, 2, 3, 4, 5, 6,...
Note: Use of the partial and total event counter functions
require the installation of a contact on the tool. For supply
and installation of the contact, contact your approved
CLAAS repair station.
581hsn03
581hsn04
581hsn05
A B C