Claas ARES 546, Использование и обслуживание, Страница: 122 / 178

ARES 506-606 - 02.2005 - GB
I.6
TOTAL WORKED SURFACE FUNCTION
From the previous configuration, pressing key (C) for more than
2 seconds gives access to the total worked surface.
The screen gives the total time worked since the last zero reset.
The cycle reset is accessible with key (A) which simultaneously
resets the partial and total surface worked counter.
Counting may be stopped and manually continued at all times
using key (B).
Lit: Counter stopped.
BLINKING: Counter on.
Counting is related to the position of the lifting arm (function valid
for lifting TCE 15 and 25).
Display: In hectares and tenths of a hectare.
PARTIAL WORKED TIME FUNCTION
With key (C), put index in front of symbol .
The display shows the working time since the last reset.
Resetting is accessible at all times using key (A) and does not
reset the total worked time counter.
Counting may be stopped and manually continued at all times
using key (B).
Lit: Counter stopped.
BLINKING: Counter on.
TOTAL WORKED TIME FUNCTION
From the previous configuration, pressing key (C) for more than
2 seconds gives access to the total worked time.
The screen gives the total time worked since the last zero reset.
The cycle reset is accessible with key (A) which simultaneously
resets the partial and total worked time counter.
Counting may be stopped and manually continued at all times
using key (B).
Lit: Counter stopped.
BLINKING: Counter on.
This frequently happens when working heavy land: It stops when
the lifting arm moves up and starts again when the arm moves
down.
- From 0 to 99,9 h, in hours and tenths of hours
- From 100 to 999 h, in hours
581hsn09
581hsn10
581hsn11
A B C