54
4
，
Thermal Print Head Settings
(1) Setting “Head Rank”
①
Check the Thermal Print Head resistance value.
②
Turn the printer ON.
③
Run OP2-Tools and select the printer to be set.
④
Under the “Option” menu, click on “Setup of HeadRank”.
⑤
Enter the Thermal Print Head resistance value, and click on “Setup”.
⑥
Click on “Get”, and check the “HeadRank” (head resistance value setting).
※
When replacing the Main Board, enter the values from the previous board.
(2) Setting “Heat Rank”
①
Check the values on the Revision seal on the bottom inside the printer.
②
Under the “Option” menu, click on “Setup of HeadRank”.
③
Input the “Heat Rank” and click on “Setup”.
④
Click on “Get”, and check the “HeatRank” (head adjustment value).
※
When replacing the Main Board, enter the values from the previous board.
