43
(5) Mechanism Adjustment
To display the current print position and cut scrap length adjustment values, click on “Get”.
①
Cutting position adjustment
This adjusts the cut scrap length for the first print.
Print one all-gray sheet. Then measure the cut scrap length from it.
Enter the adjustment value and click on “Setup”. The adjustment value will be written to
the printer.
Print result
Cause
Correction
Scrap length is
shorter than 5.5
㎜
Distance from the sensor to the
cutter is longer than ideal.
→
Increase (+) the Cutting position
adjustment by the length lacking
Scrap length is
longer than 5.5
㎜
Distance from the sensor to the
cutter is shorter than ideal.
→
Decrease (-) the Cutting position
adjustment by the excess length
■
Example
6.0mm
→
Adj value -0.5mm
5.5mm
→
Adj value 0.0mm
5.0mm
→
Adj value +0.5mm
Enter the adjustment value
