Citizen GSX-190, Руководство пользователя

Страница: 45 / 92

________________________________________________________ 45
Chapter 3: Paper Handling
_________________________________________________________________
To park your continuous paper:
1. After the current job finishes, tear off the paper after the last
page. Press the ON LINE key to take the printer off line.
2. Press the PARK/LOAD ▲ key. The paper retracts to the
parking position. The printer reverse feeds the paper a
maximum of the current page length plus 6 inches.
You can now feed single sheets into the printer, following the
directions earlier in this chapter. Remember to raise the paper
guide from the paper separator position to the upright paper
insertion position and change the paper select lever to the rear
setting {for single sheets}.
When you are ready to switch back to continuous paper, follow
these steps:
1. Eject a single sheet of paper {if one remains inserted} by taking
the printer off line and pressing the LF/FF ▼ key for 2 or 3
seconds.
2. Pull the paper select lever forward.
3. Press the PARK/LOAD ▲ key. The paper in the push tractor
advances to the top-of-form.
4. Press the ON LINE key to print again on continuous paper.