Citizen GSX-190, Руководство пользователя

Страница: 58 / 92

________________________________________________________ 58
Appendix A: Options
_________________________________________________________________
Color On Command
TM
With Citizen's exclusive Color on Command, your GSX-190 prints
in the four colors on the ribbon {red, blue, yellow, and black} plus
three mixed colors {green, orange, and violet}. You can select one
of these color by moving the MENU slide switch to the INSTALL
position while the printer is on line.
For more complex color printing, such as printing more than one
color per page, use your software to send commands to the printer
to change colors. The more sophisticated programs support up to
256 colors.
In your software program, select a printer driver that
supports color printing. In many programs, the Citizen GSX-190,
200 GX, or the Epson EX-800 or JX-80 driver can print in color.
Installing the Color Kit
1. Turn the power off, and remove the top cover.
2. Remove the standard ribbon cassette by snapping
it out of the printer.
3. Hold the color motor so its gear side faces left. Fit the two slots
on the front and rear bottom of the motor into the two notches
on the top of the frame in the printer. See Figure A-2.
4. Connect the color motor to the printer's connector. Be careful
not to bend the pins on the color motor connector.
5. Slide the printhead to the center of the platen.
6. Slide the ribbon roller guide to the center of the cassette.
Position the color ribbon cassette so the ribbon roller guide is
directly above the printhead. See Figure A-4.