Citizen GSX-190, Руководство пользователя

Страница: 40 / 92

________________________________________________________ 40
Printing on Continuous Paper
_________________________________________________________________
Because of the advanced paper-handling features of the GSX-190 it is
seldom necessary to turn the paper feed knob. Most times turning the
paper feed knob simply causes misaligned forms. Use the control
panel instead .
Follow these steps to load continuous paper:
1. Be sure the tractor is mounted in the push position.
2. Move the paper select lever to the forward {paper stack} position.
3. Unlock the lock levers on the tractor feeders and adjust them to the
approximate paper width. See Figure 3-6.
4. Open the tractor feeder covers and place the paper on the sprocket
pins. Close the covers to clamp the paper.
5. Adjust the tractor feeders until the paper is just taut between them,
and then relock the levers.
6. Install the paper guide/sheet separator in the sheet separator
position see Figure 3-7. Do this by sliding the small pins that point
into the printer onto the L-shaped channel openings on the outside
of the paper guide extensions.
Lean the paper guide backward. At the same time, slide the paper
guide forward slightly. Correctly installed, the paper guide lies flat
on top of the printer case above the paper.