Citizen GSX-190, Руководство пользователя

Страница: 32 / 92

___________________________________________________________________
32
Chapter 3
Paper Handling
Your GSX-190 printer offers great versatility in the kinds of paper you can use
and ways of loading and unloading them, This chapter discusses the detail of these
features.
.
Setting the Paper Thickness Lever
Paper up to .007 inches thick will feed smoothly through this
printer. This allows you to use bond or ledger up to 27 lb. For thick
paper, however, you need to adjust the print head away from the
platen. Adjust the paper-thickness lever mounted on a notched brace
at the left side of the printer. Move the lever toward the front of the
printer for thicker paper.
Regardless of paper thickness, do not use a setting closer to the
platen than the standard position pointer! Smudged output or
damage to the printhead could result. See Table 3-1 for the
recommended paper thickness settings for the number of copies you
are using.
A small bump on the brace {see Figure 3-1} identifies the standard
{zero} location that is appropriate for most papers. Use Table 3-1 to
find the recommended setting for the paper you are using. How you
install the tractor unit and load paper into the printer depends on
what kind of paper you select. The tractor unit has two positions:
push and pull.
The tractor unit is mounted in the push position at the factory.
When installed, it fits snugly into the rear of the printer. It works by
gripping the edges of the continuous paper and pushing it under and
around the platen until the paper comes out the top of the printer.