ð
Press & hold CAL Key until “Menu” appears on the display.
ð
Release the CAL Key
ð
Existing preselected function is displayed from among the above mentioned 4
functions. This existing function is displayed with the stability indicator ON
ð
Press Toggle Key to Toggle to the desired functions.
ð
Press Tare Key briefly, once the desired function is displayed.
Stability indicator will be ON for that particular function now.
ð
Then Press & hold TARE Key once again till “STORED” is 5displayed on the display.
ð
If more then one changes are to be made within the Menu, make all the desired
changed by pressing toggle key to toggle within the SUB-Menus & Pressing Tare
key briefly.
Stability indicator will be ON for those changed Submenu
Options Then finally, pressing & holding TARE key until “Stored”
is displayed, will store all the changes made within different
menu options.
Note :
If user did not press & hold <TARE> key & “Stored” message appears on the
display then any change made by user will remain unchanged.
Above instructions are to be followed for all menu options except : “Reset”
33
Application Menu :
5.2.1 Special applications and functions
Your balance can do more than just weighing. Built-in applications and functions
expand its possibilities and facilitate your daily work. You will learn these applications
and functions in the following Sections.
Preselecting a function
In this menu option you can preselect a function which will then be available in the
weighing mode (Unit 3) at a keystroke
The following functions are available.
Piece counting
Your balance counts the pieces you add to or remove from the weighing container.
Percent weighing
Your balance allows you to weigh in to a preset value or determines percentage
weight deviations
.
Custom Unit :
Your Balance allows you to weigh in any customized unit.
Animal Weighing :
Your Balance allows you to weigh animals in motion. You have the
option of Auto and Manual Animal Weighing.
Checkweighing :
Your balance allows you to check whether a sample corresponds to
a preset target or is within a specific tolerance range.
5.2 Description of Menu
34
5.1 Operating Instruction
