Cissell FMCD, Руководство пользователя

Страница: 34 / 40

Page 34 Page 34
Page 34 Page 34 Page 34
INST INST
INST INST INSTALLA
ALLA
ALLA ALLA ALLATION
TION
TION TION TION
CISSELL CISSELL
CISSELL CISSELL CISSELL W
W
W W WA
A
A A ATER-SPRA
TER-SPRA
TER-SPRA TER-SPRA TER-SPRAY GUNS
Y GUNS
Y GUNS Y GUNS Y GUNS
Install the Water-Spray Gun either to the water supply line or steam return line as
shown in illustration.
Before connecting water hose assembly to spray gun valve, open valve and allow water
to run freely to flush sediment from line or condenser.
Check hose connection to valve and gun and see that SG25 Gaskets are in place. Also,
see that strainer is properly installed in hose connection of gun.
The Cissell Water-Spray gun will operate on any pressure from 40 to 100 lbs. without
adjustment. It may be connected to a water supply line, or to a Cissell Steam Con-
denser installed on the pressure side of a steam trap in the steam return line.
When the City water pressure is less than 40 pounds, the Cissell Steam Condenser
must be used. Recommended operating pressure, 70 pounds.