Cissell FMCD, Руководство пользователя

Страница: 4 / 40

Page 4 Page 4
Page 4 Page 4 Page 4
CISSELL CISSELL
CISSELL CISSELL CISSELL
GARMENT MANUFACTURERS GARMENT MANUFACTURERS
GARMENT MANUFACTURERS GARMENT MANUFACTURERS GARMENT MANUFACTURERS
FORMS FORMS
FORMS FORMS
FORMS
TYPICAL INST TYPICAL INST TYPICAL INST TYPICAL INST TYPICAL INSTALLA ALLA ALLA ALLA ALLATION TION TION TION TION
GARMENTS ARE RECEIVED ON RACK OR WORK HORSE ADJACENT TO
FINISHING OPERATOR.
TUBULAR GARMENTS (DRESSES, BUTTONED COATS, ETC.) MAY BE BUNDLED
AND PLACED ON A WORK HORSE, FRONT UPWARD, WITH HEM TOWARD
THE OPERATOR. OPERATOR CAN GRASP EACH GARMENT BY THE HEM
AND SLIP IT OVER THE FORM.
GARMENTS ON HANGERS MAY BE RECEIVED ON RACKS. OPERATOR CAN
REMOVE HANGER FROM A GARMENT, CARRY THE GARMENT OVER ONE
ARM, AND HANG THE PREVIOUSLY FINISHED GARMENT ON THE SPEED
RAIL CARRIER OR ANOTHER RACK. THE UNFINISHED GARMENT CAN
THEN BE PLACED ON THE FORM. WHILE IT IS BEING STEAMED AND
DRIED, THE NEXT GARMENT CAN BE PICKED UP AND HANGER RE-
MOVED.
MAXIMUM PRODUCTION OF HEAVY GARMENTS WITH LONG STEAM AND DRY
CYCLES CAN BE UNLOADED AND RELOADED WHILE THE FIRST IS
STEAMING AND DRYING. LIGHT WEIGHT GARMENTS WITH VERY
SHORT STEAM AND DRY CYCLES PERMIT MAXIMUM PRODUCTION
WITH ONE OPERATOR WORKING ONE FORM. OPERATORS PREPARE
THE NEXT GARMENT OR OBTAIN A HANGER DURING THE STEAM AND
DRY CYCLE.
SUGGESTED FORM CENTERS ARE APPROXIMATELY 4’ 6” SO THAT THE FORMS
CAN BE OPERATED INDIVIDUALLY OR IN PAIRS AS SHOWN BY
POSITION OF AUX. STATION IN DRAWING ABOVE.