Cisco WVC54GCA, Руководство пользователя

Страница: 32 / 349

Chapter4
Advanced Configuration with the Web-based Utility
Wireless-G Internet Home Monitoring Camera
Trigger Motion Detection
Enable Motion Detection Check this box to enable
Motion Detection .
Attachment Type Select the type of attachment to be
sent, either JPEG or Video . If JPEG is selected, a series of
images will be attached to the e-mail as individual files . If
Video is selected, a single video file will be attached .
Frame Rate
If the Attachment Type field is set to
JPEG
,
select the frame rate (number of frames to be captured
per second), from 1 to 5 . The default value is
1
.
Video Format
If the Attachment Type is set to
Video
,
select the video format, either ASF, MPEG-4, or 3GP .
Pre-Capture Length
This refers to video footage up to
the moment when motion is detected . Select how many
seconds’ worth of this video will be saved . This value must
be between 0 and 4 seconds .
Post-Capture Length Select how many seconds’ worth
of video will be saved starting from the moment motion is
detected . This value must be between 1 and 5 seconds .
Interval Enter the time in minutes that must pass
between motion detection events . Valid values are 0-5,
10, or 15 . The default is
. A value of 0 indicates no delay
between events .
Action(s) Select the action(s) to be performed upon
motion detection . Select E-Mail to send an e-mail with a
video attachment to a selected recipient ., or select FTP to
send the video to a selected FTP server .
E-Mail Alert
If the Action(s) field is set to E-Mail, fill in the following
fields:
Send To Enter the e-mail address where e-mail will be
sent upon motion detection . You can optionally specify
up to three addresses .
Show “From” as Enter the e-mail address to be used as
the
From
field in the e-mail to be sent .
Subject
Enter the Subject field for the e-mail, consisting
of 48 alphanumeric characters or less .
SMTP Port Number
Enter the SMTP port number from 1
to 65535 . The default is .
SMTP Mail Server
If you want to use an SMTP mail server,
check the box next to
Specify a SMTP Mail Server
. Then
enter the mail server’s name in the field provided .
My Mail Server Requires Authentication If you are using
an SMTP mail server that requires authentication (you
must log in with a username and password), check this
box, then fill in the
Account Name and Password fields .
Test E-Mail Click this button to send a test e-mail to the
address indicated by the Send To field .
FTP
If the Action(s) field is set to FTP, fill in the following fields:
FTP Server Enter the FTP server name .
Port Enter the FTP server’s port number .
Login Name and Password Enter the login name and
password for the account on the FTP server .
Passive Mode Select Enable (default) to enable passive
mode, or Disable to disable it .
File Path Name
Enter the path to the location where the
file will be saved on the FTP server .
Set Sensitivity Area
Set Sensitivity Area If you want to specify the sensitivity
area settings for motion detection, click this button to
display the
Set Sensitivity Area
window . The
Set Sensitivity
Area
window lets you specify the area of the video screen
that is used to detect motion . This is either the full screen,
or up to three user-defined custom areas within the full
screen .
Set Sensitivity Area Window
The following fields appear on the left side of the
Set
Sensitivity Area
window for each sensitivity area . Specify
the settings as needed, then click Apply .
Full Screen or Window -
This is the name of the
sensitivity area, either
Full screen
by default, or if
Setting Custom Area is selected,
Window
,
Window
,
or
Window
(custom areas) . To change a custom
area name to a more appropriate name, such as
Front
Door
, enter the new name in this field .
Setting Custom Area
To specify custom area(s) within
the full screen, check this box, then configure up to
three custom sensitivity areas . By default only one
area,
Window
, is selected . To create an additional
area, check the box next to its name . You can move
or resize each area as needed . Custom areas may also
overlap .
Threshold Slide this to the left to reduce the area’s
sensitivity, or to the right to increase sensitivity .
•
•
•