Cisco WVC54GCA, Руководство пользователя

Страница: 12 / 349

Chapter2
Setting Up and Mounting the Camera
Wireless-G Internet Home Monitoring Camera
Plug the included power adapter into the Camera’s
Power port . Plug the other end into an electrical outlet .
Click
Next
.
Power On the Camera
Make sure the LED is lit on the Camera’s front panel . If it
is not lit, make sure the cables are properly connected
to the Camera . Click
Next .
Check the LED
The Wizard searches for the Wireless-G Internet Home
Monitoring Camera on your network, then displays the
Camera found along with status information .
Camera Found on Network
6 .
7 .
8 .
If the Camera you want is not displayed, click Search
Again to run a new search for Cameras .
Otherwise, in the Camera List box, click the name of the
Camera you are installing . Write down the Camera’s IP
address shown in the Status box, so you can use it to
access the Web-based Utility later . Click
Next .
Enter a name for the Camera . Memorable names are
helpful, especially if you are using multiple Cameras
on the same network . It should have 15 characters or
fewer . After you have entered the name, click
Next .
Assign the Camera Name
Select how to assign an IP Address to the Camera,
either automatically or manually . Then click
Next .
IP Address Settings
Automatically obtain an IP Address
Select this
option if you want to automatically assign an IP address
to the Camera using DHCP .
If you are not sure which option to choose, Linksys
recommends this option .
Set IP address configuration manually Select
this option if you want to manually assign a static IP
address to the Camera .
If you select this option, fill in the IP Address , Subnet
Mask , and Gateway fields .
9 .
10 .
•
•