Cisco WVC54GCA, Руководство пользователя

Страница: 256 / 349

6
Installation
To manually enter a WEP key, leave the Passphrase field blank, click Next , and enter the
WEP key on the next screen . This WEP key must match the WEP key of your wireless
network . For 64-bit WEP encryption, enter exactly 10 hexadecimal characters . For 128-bit
WEP encryption, enter exactly 26 hexadecimal characters . Valid hexadecimal characters
are “0” to “9” and “A” to “F” . After you have entered the WEP key, click
Next .
Review the Camera’s settings . To make
changes to the settings, click
Back
to go back to the previous screen . If
the settings are correct, click
Save to
continue .
When the Wizard informs you that the new Camera settings have been saved, click
Continue .
Disconnect the power from the Camera .
Click
Next .
Disconnect the network cable from the
Camera and from your switch or router .
Click
Next .
O.
P.
Q.
R.