Cisco WVC54GCA, Руководство пользователя

Страница: 27 / 349

Chapter4
Advanced Configuration with the Web-based Utility
1
Wireless-G Internet Home Monitoring Camera
Setup > Basic
The Setup > Basic screen appears when you click the
Setup
tab or
Advanced Configuration
on the Welcome screen .
The Setup > Basic screen allows you to alter the Camera’s
Device settings, Network settings, Wireless settings, and
Security settings .
Setup > Basic Screen
Edit the settings on this screen as needed . Then, to save
your changes, click
Apply . To cancel any unsaved changes,
click Cancel . To get additional information about the
screen’s features, click Help .
Device Settings
Camera Name You may assign the Camera any name
up to 15 characters long . Unique, memorable names
are helpful, especially if you use multiple Cameras on
the same wireless network .
Description Enter information about the Camera in
this field . You can enter up to 32 characters .
LED Operation This feature allows you to enable or
disable the Camera’s LED .
Current Date/Time
This displays the Camera’s current
date and time . If it is incorrect, click
Sync with PC
to
use your computer’s date and time .
Time Zone
Select the time zone for the Camera’s
location .
Adjust for Daylight Saving Time Select this to adjust
the Camera’s current time for Daylight Saving Time .
NOTE: You must unselect this option when
Daylight Saving Time finishes .
•
•
•
•
•
•
Network Settings
Configuration Type If you want to automatically
assign the Camera an IP address from a DHCP server,
then select
Obtain Address Automatically (DHCP)
(default) . If you want to assign the Camera a static IP
address, then select
Fixed IP Address , and complete
the IP Address, Subnet Mask , Gateway , Primary DNS and
Secondary DNS fields .
IP Address, Subnet Mask, Gateway, Primary DNS,
Secondary DNS
Complete these fields if you want
to assign the Camera a static IP address . You need to
enter at least one DNS address .
Wireless Settings
SSID Enter the network’s SSID or network name here .
Network Type Select the network’s mode, Ad-hoc or
Infrastructure .
Channel No If the Camera is set to Ad-hoc mode,
select its channel setting from the drop-down menu .
Security
Click
Edit Security Settings
to display the
Wireless Security screen .
Setup > Basic > Wireless Security
The Wireless Security screen is used to configure the
Camera’s wireless security settings to match your wireless
network settings . The settings are as follows .
Security Mode Select the wireless security mode used
by your wireless network:
Disable (no wireless security)
WEP
WPA/WPA Personal
.
The method selected determines which other fields are
displayed on the screen . The different security modes
and the fields that accompany them are described in
detail below .
D
isable
This option implements no security on your wireless
network . Data is not encrypted before transmission .
Wireless Security - Disable Security Mode
WEP
WEP is a basic encryption method, which is not as
secure as later methods such as WPA-Personal or WPA2
Personal . However, it is supported by all clients .
•
•
•
•
•
•
•
•
•
•
•