Cisco WRT54GL, Быстрое руководство по установке

Страница: 116 / 563

Chapter 3
Advanced Configuration
10
Wireless-G Broadband Router
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes.
Setup > Advanced Routing
This screen is used to set up the Router’s advanced
functions. Operating Mode allows you to select the
type(s) of advanced functions you use. Dynamic Routing
automatically adjusts how packets travel on your network.
Static Routing sets up a fixed route to another network
destination.
Setup > Advanced Routing (Gateway)
Setup > Advanced Routing (Router)
Advanced Routing
Operating Mode Select the mode in which this Router
will function. If this Router is hosting your network’s
connection to the Internet, select
Gateway . If another
Router exists on your network, select Router . When
Router is chosen, Dynamic Routing will be available as
an option.
Dynamic Routing
RIP This feature enables the Router to automatically
adjust to physical changes in the network’s layout and
exchange routing tables with the other router(s). The
Router determines the network packets’ route based on
the fewest number of hops between the source and the
destination. This feature is
Disabled by default. From the
drop-down menu, you can also select LAN & Wireless ,
which performs dynamic routing over your Ethernet and
wireless networks. You can also select
WAN (Internet) ,
which performs dynamic routing with data coming from
the Internet. Selecting
Both enables dynamic routing for
both networks, as well as data from the Internet.
Static Routing
Select set number To set up a static route between
the Router and another network, select a number from
the drop-down list. (A static route is a pre-determined
pathway that network information must travel to reach a
specific host or network.) Enter the information described
below to set up a new static route. (Click
Delete This Entry
to delete a static route.)
Enter Route Name Enter a name for the Route here,
using a maximum of 25 alphanumeric characters.
Destination LAN IP The Destination LAN IP is the address
of the remote network or host to which you want to assign
a static route.
Subnet Mask The Subnet Mask determines which
portion of a Destination LAN IP address is the network
portion, and which portion is the host portion.
Default Gateway This is the IP address of the gateway
device that allows for contact between the Router and the
remote network or host.
Interface This interface tells you whether the Destination
IP Address is on the LAN & Wireless (Ethernet and wireless
networks) or the WAN (Internet) .
Click
Show Routing Table
to view the Static Routes you
have already set up.
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes.