Cisco WAVE-574-K9 - Wide Area Virtualization Engine 574, Руководство по установке оборудования

Страница: 61 / 112

5-3
Cisco Wide Area Virtualization Engine 574 Hardware Installation Guide
OL-17738-01
Chapter 5 WAVE Inline Network Adapter
Ports and LED Indicators
prevents the WAVE appliance from becoming a single point of failure and allows
traffic to continue to flow between the router and the client while it passes through
an unresponsive WAVE appliance without being processed.
For more information about configuring the inline network adapter, see the Cisco
Wide Area Application Services Configuration Guide.
Ports and LED Indicators
Figure 5-2 shows the 4-port inline network adapter port numbers, interface
designations, and LEDs. The 2-port adapter is similar, but has only two ports and
two sets of LEDs.
Figure 5-2 4-Port Inline Network Adapter Port Numbering and LEDs
The inline network adapter has three LEDs that correspond to each port (the W1
LEDs correspond to Port W1, and so forth).
Table 5-1 describes the LEDs.
W1
Port WAN1; Group 1 WAN interface
L1
Port LAN1; Group 1 LAN interface
W0 Port WAN0; Group 0 WAN interface L0 Port LAN0: Group 0 LAN interface
W1 L1 W0 L0
LINK/ACT
100
1000
BYPASS
W1 L1 W0 L0
272072