Cisco WAVE-574-K9 - Wide Area Virtualization Engine 574, Руководство по установке оборудования

Страница: 58 / 112

Chapter 4 Installing Hardware Options for the WAVE-574
Installing Memory
4-10
Cisco Wide Area Virtualization Engine 574 Hardware Installation Guide
OL-17738-01
Figure 4-5 Installing a DIMM
Step 7
Check to make sure that the DIMM latches are fully engaged in the notches.
Step 8 Install the access panel.
Step 9 Install the WAVE appliance into the rack.
Step 10
Reboot the WAVE appliance.
Step 11
Use the show memory EXEC mode command to verify that the memory you
installed is recognized by the WAVE appliance.
Step 12
Repartition the disks, using the disk delete-data-partitions command, and
reload.
Note
Repartitioning the disks is required after adding memory to reset the DRE
space allocation.