Cisco WAVE-574-K9 - Wide Area Virtualization Engine 574, Руководство по установке оборудования

Страница: 34 / 112

Chapter 2 Preparing to Install the WAVE-574
Safety Warnings and Cautions
2-2
Cisco Wide Area Virtualization Engine 574 Hardware Installation Guide
OL-17738-01
Safety Warnings and Cautions
Before you install the WAVE-574, observe the following safety warnings and
cautions:
Warning Read the installation instructions before connecting the system to the power
source.
Statement 1004
Warning This unit is intended for installation in restricted access areas. A restricted
access area can be accessed only through the use of a special tool, lock and
key, or other means of security.
Statement 1017
Warning
The plug-socket combination must be accessible at all times, because it serves
as the main disconnecting device.
Statement 1019
Warning
This equipment must be grounded. Never defeat the ground conductor or
operate the equipment in the absence of a suitably installed ground conductor.
Contact the appropriate electrical inspection authority or an electrician if you
are uncertain that suitable grounding is available.
Statement 1024
Warning
Only trained and qualified personnel should be allowed to install, replace, or
service this equipment.
Statement 1030
Warning
Installation of the equipment must comply with local and national electrical
codes.
Statement 1074
Caution To properly ventilate the system, you must provide at least 7.6 cm (3.0 in) of
clearance at the front and back of the WAVE appliance.