Cisco WAVE-574-K9 - Wide Area Virtualization Engine 574, Руководство по установке оборудования

Страница: 39 / 112

2-7
Cisco Wide Area Virtualization Engine 574 Hardware Installation Guide
OL-17738-01
Chapter 2 Preparing to Install the WAVE-574
Understanding the Environmental Requirements
•
Handle all sensitive components in a static-safe area. If possible, use
antistatic floor pads and workbench pads.
•
Handle the appliance carefully, holding it by its edges or its frame.
•
Do not touch solder joints, pins, or exposed printed circuitry.
• Do not leave the appliance where others can handle and possibly damage the
appliance.
•
Take additional care when handling appliances during cold weather, because
heating reduces indoor humidity and increases static electricity.
Understanding the Environmental Requirements
To ensure continued safe and reliable equipment operation, install or position the
system in a well-ventilated, climate-controlled environment.
The maximum recommended ambient operating temperature (TMRA) for most
server products is 35 °C (95 °F). The temperature in the room where the rack is
located must not exceed 35 °C (95 °F).
For details about the WAVE-574 environmental requirements, see Appendix A,
“WAVE-574 Hardware Specifications.”
Understanding the Power Requirements
Installation of this equipment must comply with local and regional electrical
regulations governing the installation of information technology equipment by
licensed electricians. This equipment is designed to operate in installations
covered by NFPA 70, 1999 Edition (National Electric Code) and NFPA-75, 1992
(code for Protection of Electronic Computer/Data Processing Equipment).
Warning
Take care when connecting units to the supply circuit so that wiring is not
overloaded.
Statement 1018