Cisco WAP571, Руководство администратора

Страница: 42 / 192

Administration
Email Alert
Cisco WAP571/E Administration Guide 42
3
• Data Encryption —Enter the mode of security for the outbound email alert.
The alert can be sent using secure TLS protocol or the default Open
protocol. Using secure TLSv1 protocol can prevent eavesdropping and
tampering during the communication across the public network.
• Port —Enter the SMTP port number to use for outbound e-mails. The range
is a valid port number from 0 to 65535. The default port is 465. The port
generally depends on the mode used by the email provider.
• Username —Enter the username for the email account that will be used to
send these mails. Typically (but not always) the username is the full email
address including the domain (such as Name@example.com). The specified
account will be used as the email address of the sender. The username can
be from 1 to 64 alphanumeric characters.
• Password —Enter the password for the email account that will be used to
send these mails. The password can be from 1 to 64 characters.
STEP 4
Configure the email addresses and subject line.
• To Email Address 1/2/3 —Enter up to three addresses to receive email
alerts. Each email address must be valid.
• Email Subject —Enter the text to appear in the email subject line. This can be
up to a 255 character alphanumeric string.
STEP 5
Click Test Mail to send a test email to validate the configured email account.
STEP 6
Click Save . The changes are saved to the Startup Configuration.
Email Alert Examples
The following example shows how to fill in the Mail Server Configuration
parameters:
Gmail
Server IPv4 Address/Name = smtp.gmail.com
Data Encryption = TLSv1
Port = 465
Username = Your full email address you can use to login to your email account
associated with the above server
Password = xxxxxxxx is a valid password of your valid email account
To Email Address 1 = myemail@gmail.com
Windows Live Hotmail
Windows Live Hotmail recommends the following settings: