Cisco WAP571, Руководство администратора

Страница: 36 / 192

Administration
Time Settings
Cisco WAP571/E Administration Guide 36
3
STEP 1
Select Administration > User Accounts in the navigation pane.
The User Account Table shows the currently configured users. The user cisco is
preconfigured in the system to have Read/Write privileges. The password for the
user
cisco can be changed.
STEP 2
Select the user to configure and click Edit .
STEP 3
Enter a New Password between 1 and 64 characters and then enter the same
password in the Confirm New Password text box.
As you enter a password, the number and color of vertical bars changes to
indicate the password strength, as follows:
• Red —The password fails to meet the minimum complexity requirements.
• Orange —The password meets the minimum complexity requirements but
the password strength is weak.
• Green —The password is strong.
STEP 4
Click Save . The changes are saved to the Startup Configuration.
NOTE
If you change your password, you must log in again to the system.
Time Settings
A system clock provides a network-synchronized time-stamping service for
software events such as message logs. You can configure the system clock
manually or configure the WAP device as a Network Time Protocol (NTP) client
that obtains the clock data from a server.
Use the Time Settings page to set the system time manually or to configure the
system to acquire its time settings from a preconfigured NTP server. By default,
the AP is configured to obtain its time from a predefined list of NTP servers.
The current system time appears at the top of the page, along with the System
Clock Source option.
To use NTP to have the WAP device automatically acquire its time settings:
To automatically acquire the time settings through NTP: