2-9
Cisco TelePresence System TX1300 47 Installation, First-Time Setup, and Field-Replaceable Unit Guide
OL-24695-01
Chapter 2 Assembling the Cisco TelePresence System TX1300 47—Freestanding Version
Assembling the TX1300 47
c.
Attach the USB type B and DVI cables to the processor. These cables are already connected to the
light reflector.
Note
The DVI cable is tied to the light reflector with a cable tie to prevent damage during shipping.
Cut the cable tie and release the cable in order to connect it to the camera processor.
Figure 2-7
Inserting the Camera Processor Into the Light Reflector
209317
a
b
c
