2-8
Cisco TelePresence System TX1300 47 Installation, First-Time Setup, and Field-Replaceable Unit Guide
OL-24695-01
Chapter 2 Assembling the Cisco TelePresence System TX1300 47—Freestanding Version
Assembling the TX1300 47
Step 6
Place the cable cover on the rear of the light reflector and cabinet and attach it with the four screws (P/N
79-2178-01).
The cover is located in the accessory kit.
Figure 2-6
Attaching the Rear Cable Cover to the Light Reflector and Cabinet
Step 7
Attach the camera processor to the light reflector:
a.
Place the processor, found with the camera in box #5, into the light reflector.
b.
Remove the thumb screw from the light reflector and attach the processor to the light reflector using
the thumb screw. See callout b in
Figure 2-7
for more information.
209269
