2-11
Cisco TelePresence System TX1300 47 Installation, First-Time Setup, and Field-Replaceable Unit Guide
OL-24695-01
Chapter 2 Assembling the Cisco TelePresence System TX1300 47—Freestanding Version
Assembling the TX1300 47
Step 9
Install the camera:
a.
Using a #3 allen wrench, loosen the three screws in the camera assembly.
b.
Slide the camera into its attachment point in the reflector.
c.
Secure the camera with the three screws.
d.
Attach the three camera cables to the camera processor. The cables attach to the processor in the
same orientation as they come from the camera; left-most cable to left-most connector, middle cable
to middle connector, and right-most cable to right-most connector.
Figure 2-9
Attaching the Camera and Camera Cables to the Light Reflector and Camera Processor
208410
