manualshive.com logo in svg

Cisco SPA1112, Руководство по комплектации

Поделиться
Скачать
Cisco SPA1112 Скачать руководство пользователя страница 72

Provisioning Parameters

Configuration Profile Parameters

Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters

72

5

 

Resync_Trigger_1, 
Resync_Trigger_2

Configurable resync trigger conditions. A 
resync is triggered when the logic equation 
in these parameters evaluates to TRUE.

The default value is (empty).

Resync_Fails_On_FNF

Determines whether a file-not-found 
response from the provisioning server 
constitutes a successful or a failed resync. 
A failed resync activates the error resync 
timer.

The default value is Yes.

Profile_Rule

This parameter is a profile script that 
evaluates to the provisioning resync 
command. The command specifies the 
protocol (TFTP, HTTP, or HTTPS) and an 
associated URL. 

If the command is not specified, TFTP is 
assumed, and the address of the TFTP 
server is obtained through DHCP option 66. 
In the URL, either the IP address or the 
FQDN of the server can be specified. The 
file name can have macros, such as $MA, 
which expands to the device MAC address.

The default value is /spa$PSN.cfg.

Profile_Rule_B, Profile_Rule_C, 
Profile_Rule_D

Defines second, third, and fourth resync 
commands and associated profile URLs. 
These profile scripts are executed 
sequentially after the primary Profile Rule 
resync operation has completed. If a resync 
is triggered and Profile Rule is blank, Profile 
Rule B, C, and D are still evaluated and 
executed.

The default value is (empty).

Log_Resync_Request_Msg

This parameter contains the message that 
is sent to the syslog server at the start of a 
resync attempt.

The default value is $PN $MAC – 
Requesting resync $SCHEME://
$SERVIP:$PORT$PATH.

Parameter Name

Description and Default Value

Содержание SPA1112






















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды