manualshive.com logo in svg

Cisco SPA1112, Руководство по комплектации

Поделиться
Скачать
Cisco SPA1112 Скачать руководство пользователя страница 122

Voice Parameters

Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters

122

6

 

<VoIP_User_1_Auth_ID_3_> through 
<VoIP_User_8_Auth_ID_3_>

A user ID that a VoIP Caller can use for authentication by using 
the HTTP Digest method (in other words, by embedding an 
Authorization header in the SIP INVITE message sent to the 
ATA. If the credentials are missing or incorrect, the ATA will 
challenge the caller with a 401 response). The VoIP caller 
whose authentication user-id equals to this ID is referred to 
VoIP User 1 of this ATA.

NOTE:

If the caller specifies an authentication user-id that 

does not match any of the VoIP User Auth ID’s, the INVITE will 
be rejected with a 403 response. 
Default setting: blank. 

<VoIP_User_1_Password_3_> through 
<VoIP_User_8_Password_3_>

The password to be used with VoIP User 1. The user assumes 
the identity of VoIP User 1 must therefore compute the 
credentials using this password, or the INVITE will be 
challenged with a 401 response
Default setting: blank. 

<VoIP_User_1_DP_3_>through <VoIP_
User_8_DP_3_>

For up to 8 VoIP users, specify the index of the dial plan to be 
used after successful authentication. If authentication is 
disabled, the default dial plan is used for all unknown VoIP 
users.
Default setting: 1.

<PSTN-To-VoIP_Gateway_Enable_3_>

Select yes to enable or select no to disable PSTN-To-VoIP 
Gateway functionality.
Default setting: yes

<PSTN_Caller_Auth_Method_3_>

The method to authenticate a PSTN Caller to access the VoIP 
gateway. Choose from none or PIN. 
Default setting: none

<PSTN_Ring_Thru_1_3_>

To enable ring through to Line 1 based on caller number 
patterns, choose yes. Otherwise choose no. 

Note:

 For more information about PSTN Caller number 

patterns, see 

<PSTN_Caller_ID_Pattern_3_>

.

Default setting: yes

Содержание SPA1112






















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды