manualshive.com logo in svg

Cisco SPA1112, Руководство по комплектации

Поделиться
Скачать
Cisco SPA1112 Скачать руководство пользователя страница 130

Voice Parameters

Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters

130

6

 

<Reorder_Tone>

Played when an outbound call has failed, or after the far end 
hangs up during an established call. Reorder Tone is played 
automatically when Dial Tone or any of its alternatives times 
out.
Default setting: 480@-5,620@-5;10(.25/.25/1+2)

<Off_Hook_Warning_Tone>

Played when the caller has not properly placed the handset 
on the cradle. Off Hook Warning Tone is played when the 
Reorder Tone times out.
Default setting: 480@-3,620@3;10(.125/.125/1+2)

<Ring_Back_Tone>

Played during an outbound call when the far end is ringing.
Default setting: 440@-5,480@-5;*(2/4/1+2)

<Ring_Back_2_Tone>

Your ATA plays this ringback tone instead of Ring Back Tone if 
the called party replies with a SIP 182 response without SDP 
to its outbound INVITE request.
Default setting: the same as Ring Back Tone, except the 
cadence is 1s on and 1s off.
Default setting: 440@-5,480@-5;*(1/1/1+2)

<Confirm_Tone>

Brief tone to notify the user that the last input value has been 
accepted.
Default setting: 600@-4;1(.25/.25/1)

<SIT1_Tone> through <SIT4_Tone>

Alternative to the Reorder Tone played when an error occurs 
as a caller makes an outbound call. The RSC to trigger this 
tone is configurable on the SIP screen.
Default setting: 985@-4,1428@-4,1777@-4;20(.380/0/1,.380/
0/2,.380/0/3,0/4/0)

<MWI_Dial_Tone>

Played instead of the Dial Tone when there are unheard 
messages in the caller’s mailbox.
Default setting: 350@-5,440@-5;2(.1/.1/1+2);10(*/0/1+2)

<Cfwd_Dial_Tone_>

Played when all calls are forwarded. 
Default setting: 350@-5,440@-5;2(.2/.2/1+2);10(*/0/1+2)

<Holding_Tone>

Informs the local caller that the far end has placed the call on 
hold.
Default setting: 600@-5;*(.1/.1/1,.1/.1/1,.1/9.5/1)

<Conference_Tone>

Played to all parties when a three-way conference call is in 
progress.
Default setting: 350@-5;20(.1/.1/1,.1/9.7/1)

Содержание SPA1112






















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды