Getting Started
Using IVR on IP Phones Without Screens
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
32
1
220
Recites the method of call control (SIP or SPCP).
221
Set call control—enter the value for the call control method and press #:
•
0: SIP
•
1: SPCP
To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *.
73738
Restores the phone to the factory default software and settings.
Enter 1 to confirm, or * to exit. If you chose to reset, hang up to exit and
begin the restore process.
87778
(Cisco
SPA501G)
Restore the phone user settings to the default. (Clears all user settings
such as speed dials.)
Enter 1 to confirm, or * to exit. If you chose to reset, hang up to exit and
begin the restore process.
732668
Reboot the phone. Enter # and hang up to begin rebooting.
111
Set a static IP address. Enter the IP address (use
*
to enter the decimal
(.)), then press #.
To save, press 1; to review, press 2; to re-enter, press 3; to exit, press
*
.
NOTE
DHCP must be disabled to use this option; if DHCP is not
disabled, you receive an error message.
121
Set a netmask. Enter the address (use
*
to enter the decimal (.)), then
press #.
To save, press 1; to review, press 2; to re-enter, press 3; to exit, press
*
.
NOTE
DHCP must be disabled to use this option; if DHCP is not
disabled, you receive an error message.
131
Set a gateway. Enter the address (use
*
to enter the decimal (.)), then
press #.
To save, press 1; to review, press 2; to re-enter, press 3; to exit, press
*
.
NOTE
DHCP must be disabled to use this option; if DHCP is not
disabled, you receive an error message.
161
Set the address of the primary Domain Name Server (DNS). Enter the
address (use
*
to enter the decimal (.)), then press #.
To save, press 1; to review, press 2; to re-enter, press 3; to exit, press
*
.
Number
Option
