Configuring Regional Parameters and Supplementary Services
Distinctive Call Waiting Tone
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
197
7
Example 2: Distinctive Ring (short, short, short, long)
60(.2/.2,.2/.2,.2/.2,1/4)
where:
•
Number of Cadence Sections = 1
•
Cadence Section 1: Section Length = 60s
•
Number of Segments = 4
•
Segment 1: On=0.2s, Off=0.2s
•
Segment 2: On=0.2s, Off=0.2s
•
Segment 3: On=0.2s, Off=0.2s
•
Segment 4: On=1.0s, Off=4.0s
•
Total Ring Length=60s
Distinctive Call Waiting Tone
When the phone is off-hook on a call, the call waiting tone plays. Support for
Distinctive Ring is based on the Alert-Info header that supports the Distinctive Call
Waiting tone. The distinctive call waiting tone is generated based on the phone
call waiting tone frequency and gain values, and the cadence value of the matched
ring tone.
The cadence value (following the
c=
element) of the matched ring tone must be
an integer from 1 to 9 that specifies the ring cadence under the
Regional
tab of
the phone web user interface.
If there is no matching ring tone name, or an invalid cadence value is specified, the
configured Call Waiting Tone is used.
