Getting Started
Using the Web-Based Configuration Utility
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
23
1
Allowing Web Access to the IP Phone
To view the phone parameters by using the phone web user interface, the
configuration profile must be enabled. To make changes to any of the parameters
by using the phone web user interface, the configuration profile must be writable.
Your system administrator might have disabled the phone option to make the
phone web user interface viewable or writable.
For more information, see the
Cisco Small Business IP Telephony Provisioning
Guide.
Cisco SPA303, Cisco SPA500 Series
To allow or disallow from the phone viewing of the phone web user interface:
STEP 1
Press the
Setup
button.
STEP 2
To display the Web Server Writable option either:
•
Select
Network
>
Enable
Web Server
.
•
Select
Settings
>
Security Configuration
>
Web Access Enabled
.
NOTE
This option is available in SPCP mode only.
STEP 3
Press
Edit
to change the status of the Web Access Enabled parameter.
If the option to edit the parameter is not displayed, press
**#
to display the option.
If the edit option still does not display, it might be set by your phone system
administrator such that you cannot modify this parameter.
STEP 4
Press
Y/N
to toggle the parameter and press
ok
to set the parameter.
STEP 5
To save your change, press
save
.
Making the Profile Writeable
On some models you can enable modifying the configuration profile by using the
phone web user interface or disable the ability to modify the profile making the
phone web user interface read only.
To toggle the write access:
