Cisco Small Business 200, Руководство администратора

Страница: 269 / 351

Security
Defining Management Access Method
Cisco Small Business 200 Series Smart Switch Administration Guide 256
17
The selected access profile appears in the Profile Rule Table.
STEP 3
Click Add to add a rule.
STEP 4
Enter the parameters.
• Access Profile Name —Select an access profile.
• Rule Priority —Enter the rule priority. When the packet is matched to a rule,
user groups are either granted or denied access to the device. The rule
priority is essential to matching packets to rules, as packets are matched on
a first-fit basis.
• Management Method —Select the management method for which the rule
is defined. The options are:
- All —Assigns all management methods to the rule.
- HTTP —Assigns HTTP access to the rule. Users requesting access to the
device that meets the HTTP access profile criteria, are permitted or
denied.
- Secure HTTP (HTTPS) —Users requesting access to the device that
meets the HTTPS access profile criteria, are permitted or denied.
- SNMP —Users requesting access to the device that meets the SNMP
access profile criteria are permitted or denied.
• Action —Select Permit to permit the users that attempt to access the device
by using the configured access method from the interface and IP source
defined in this rule. Or select
Deny to deny access.
• Applies to Interface —Select the interface attached to the rule. The options
are:
- All —Applies to all ports, VLANs, and LAGs.
- User Defined —Applies only to the port, VLAN, or LAG selected.
• Interface —Enter the interface number.
• Applies to Source IP Address —Select the type of source IP address to
which the access profile applies. The Source IP Address field is valid for a
subnetwork. Select one of the following values:
- All —Applies to all types of IP addresses.
- User Defined —Applies to only those types of IP addresses defined in
the fields.